Broken laptop screens can be difficult to repair. If you have experience with laptop repairs, you can check the wiring and backlight connections or take your laptop to a professional. Broken screens can be very complicated and one mistake can cause your laptop to stop working entirely. Follow these steps carefully to avoid damaging the LCD or video cable.
To begin, remove the protective bezel around the screen. If there are any screws visible on the bezel, remove them with a pin. You can also use a thin object to pry the bezel off. You can then place the new screen on the back case. Make sure the sticky side is facing up.
To remove the screen, you will need to unscrew the screws on the bezel. This will make it easier to get at the LCD. Make sure you do this carefully, as the glass can break and you may need to use a magnifying glass. You will need a flat surface to work on, so you need to place the tools close by. Once you have assembled all the tools, you’ll need to turn off your laptop and remove the battery. Turning off your laptop before replacing the screen is very important to prevent any other issues. If your display is hinged, you will need to remove the bezel as well.
Once you’ve removed the screen from your laptop, you can apply a glass screen protector to prolong the life of your device. This can prevent you from spending money on a replacement screen. Afterward, reinstall the frame rail with the two screws that hold it in place. Make sure to reconnect the inverter cable with a piece of tape before replacing the screen.
If the screen is physically cracked, you’ll need to try multiple fixes before getting to the core problem. You may need to stop the process if you notice that the screen works again. But if it doesn’t, you’ll have to replace the whole panel. Once you’ve done this, you’ll be able to see your display and be satisfied that it is functioning again.
You can buy a replacement screen at a laptop parts retailer to replace the broken LCD. It can cost $50 to 250, depending on the type of screen and its manufacturer. Be sure to get the correct screen for your model. You should also check the new one’s dimensions, connectors, and mounting brackets. If you’re unsure of these details, you can try looking online for instructions.
A broken laptop display can stop you dead in your tracks. The right tools, some patience, and some technical knowledge can help you repair a broken laptop LCD screen. In this step-by-step guide, Bill Detwiler shows you how to replace an LCD panel on an Asus UL50V notebook. This notebook is an LED-backlit LCD. Once you have the right tools, you’ll have a new screen for your device in no time.
If you can replace the screen yourself, you can save a lot of money. In most cases, you’ll have to spend only $50 to $100 to replace the screen, which is a lot less expensive than spending $300 on a professional. The entire process should only take an hour or two.